Comparison

Staht, Hydrajaws and Big Ben pull testers compared

In short

This page sets Staht's t25 and t60 digital pull testers beside testers of similar capacity from Hydrajaws (the M2000 PRO, M2050 PRO and M35+) and the Big Ben (BIGBEN) anchor test kits sold by Leach's. Every figure is from the maker's or seller's own published material, with the source: Staht's and Hydrajaws' websites, data sheets and manuals, and Leach's web pages. Where a maker or seller doesn't publish a figure, the table says so.

How they differ

  • Capacity. The Staht t25 and Hydrajaws M2000 PRO test to 25 kN, the Staht t60 to 60 kN, the Hydrajaws M2050 PRO to 50 kN and the Hydrajaws M35+ to 35 kN, or 65 kN with a larger bridge; Leach's BIGBEN anchor test kits apply up to 25 kN.
  • Display. The t25 and t60 show live and peak load together on a colour screen; Hydrajaws offers digital gauges with peak hold, and analogue gauges on the M2000 PRO and M2050 PRO; the BIGBEN kits have an analogue hydraulic gauge.
  • Accuracy. Staht (for the t25 and t60 load cells) and Hydrajaws (for the M2000 PRO and M2050 PRO digital gauges) both state ±1.5% of full scale; Hydrajaws gives no figure for the M35+, and Leach's none for the BIGBEN gauge.
  • App and team use. Staht Connect and its reports are free, with no subscription, including team use; Hydrajaws Verify PRO is "FREE to use with no subscription required" and "Ideal for single users", and Verify TEAMS, for an administrator assigning tasks to field testers, has an annual subscription fee; Leach's doesn't mention an app for the BIGBEN kits.
  • Standards each maker or seller names. Staht says the t25 and t60 are designed for testing to BS 8539, BS 7883, NASC TG4:25 and AEFAC TN05; Hydrajaws names BS 8539, BS 7883, BS EN 795 and AEFAC-TN05 for the M2000 PRO and M2050 PRO, adding BS 8610 and NASC Guidance Note TG4:19 for the M35+; Leach's calls its BIGBEN scaffold and construction kits "NASC Technical Guidance TG4:19 Type Certified".
  • Calibration. The t25 and t60 come with a 12-month UKAS-traceable calibration certificate; Hydrajaws' gauge certificates are valid for 12 months, and it calibrates against UKAS-tested master gauges; Leach's includes a calibration certificate with the BIGBEN construction kit, and its August 2024 article offers 2 years of free recalibration with a purchase.

About Staht's testers: Staht designs and makes the t25 and t60 in the West Midlands, UK, and the t25 won Product of the Year at the NASC Scaffolding Excellence Awards 2025.

Where do these figures come from?

Staht and Hydrajaws figures read on 7 and 8 November 2026; Leach's BIGBEN figures and Verify TEAMS prices read on 8 November 2026.

Staht makes the t25 and t60; their figures come from Staht's data sheets, product pages and guides. Hydrajaws' figures come from hydrajaws.co.uk product pages and the leaflets and manuals they link to. Leach's BIGBEN figures come from Leach's own pages for its BIGBEN anchor test kits at shop.leachs.com. All are listed under Sources.

We haven't tested Hydrajaws or BIGBEN equipment, and this page doesn't rate anyone's testers. Each value is in the maker's or seller's own terms, prices aren't compared, and specifications change: check each maker's or seller's current information before you buy.

25 kN class: Staht t25, Hydrajaws M2000 PRO and M35+, and Leach's BIGBEN kits

Staht t25 Digital Pull Tester Kit, mini HD caseHydrajaws M2000 PRO Tester KitSource, read 7 November 2026Hydrajaws M35+ (standard bridge)Source, read 7 November 2026BIGBEN Anchor Test Kits for Scaffolds and for Construction Fixings (Leach's)Source, read 8 November 2026
Maximum load25 kN25 kN35 kN with the standard bridgeUp to 25 kN
Accuracy, as the maker states itLoad cell: ±1.5% of full scale (up to ±0.375 kN)Digital gauge: ±1.5% fsd. Analogue gauge: not publishedNot publishedNot published
Torque at full loadNot publishedNot published9.8 Nm at 35 kNNot published
DisplayFull colour screen showing live and peak load together; metric and imperialDigital or analogue gauge, dual scale kN and lbf; the digital gauge has peak holdRechargeable digital gauge, dual scale kN and lbf, with peak holdAnalogue hydraulic gauge, 0 to 25 kN. Leach's also sells 0 to 5 kN and 0 to 6,000 lbf replacement gauges for the BIGBEN tester
App and recordsStaht Connect, free with no subscription, over Bluetooth: peak load, target load, pass or fail, time, photos and a map pin; reports from a web dashboardHydrajaws Verify PRO, free, with the digital gauge: report with pass or fail, graph, fixing details, location, date, time, notes and photos; reports also on a web dashboardHydrajaws Verify PRO, free: the same reports and web dashboardNo app mentioned by Leach's
Team useFree, with no subscription: several users, with reports filtered by team member and shared with your teamVerify PRO free, "Ideal for single users"; Verify TEAMS, for an administrator to assign tasks to field testers, paid: "Annual subscription fee applies. Up to 3 users £300" (ex VAT; read 8 Nov 2026)As the M2000 PRONo app mentioned by Leach's
Weight, as the maker states itLoad cell 1.39 kg; bridge 2.72 kg; kit 9 kg; packaged 9.5 kgTester only 2.2 kg; case weight 10 kg (leaflet), packaged weight 8 kg (manual)Tester only 3.7 kg; standard kit with rucksack 8.7 kgNot published
Bridge4 legs; clear between feet 127 mm along the bridge, 59 mm across; optional 375 mm and 575 mm bridges3 legs; 116 mm between feet edges (leaflet), 117 mm on the manual's drawing; optional 270 mm and 600 mm bridges and a pyramid stool3 legs; standard bridge 110 mm spanLegs and span not published. Leg extensions of 50, 75 and 90 mm sold in sets of 3; the construction kit page offers free leg extensions, "x3 50mm & x3 75mm"
Adaptors in the kitAnchor jaw with threaded washers M6, M8, M10, M12, M16 and slotted washers M6 to M16; clevis with captive pinM12 ringbolt clevis; bolt tester adaptor with M12 locking adaptor; M16 and M20 stud adaptors; 6 slotted and 6 threaded (M4 to M12) button adaptorsBolt test adaptor; 20 mm and 24 mm clevis forks; 5 slotted and 6 threaded (M6 to M20, metric kit) button adaptorsConstruction kit: adaptors M10 to M20, male and female; 6 threaded (M4 to M12) and 6 slotted (4.5 to 12.5 mm). Scaffold kit: not published
Calibration12-month certificate included; recalibration by Staht or by a local calibration laboratoryGauge certificate valid 12 months; the gauge detaches for recalibration by Hydrajaws or its service agentsGauge certificate valid 12 monthsConstruction kit: calibration certificate included. Leach's article of August 2024: "2 years of free recalibration with your purchase"
Standards named, in each maker's or seller's wordsDesigned for testing to BS 8539, BS 7883, NASC TG4:25 and AEFAC TN05Testing "in line with" BS 8539, BS 7883:2019, BS EN 795:2012 and AEFAC-TN05Testing "in line with" BS 8539, BS 7883:2019, BS EN 795:2012, BS 8610, NASC Guidance Note TG4:19 and AEFAC-TN05"NASC Technical Guidance TG4:19 Type Certified" (scaffold kit page; construction kit in Leach's article)

Staht and Hydrajaws figures read on 7 and 8 November 2026, Leach's BIGBEN pages and Verify TEAMS prices on 8 November 2026. Each Staht and Hydrajaws figure is from the page linked, or the leaflet, manual or page it links to. Each BIGBEN figure is from one of Leach's pages listed under Sources.

50 to 65 kN class: Staht t60, Hydrajaws M2050 PRO and M35+

Staht t60 Digital Pull Tester Kit, caseHydrajaws M2050 PRO Tester KitSource, read 7 November 2026Hydrajaws M35+ (Dual kit or large bridge)Source, read 7 November 2026
Maximum load60 kN50 kN65 kN with the medium bridge (Dual kit) or the optional large bridge
Accuracy, as the maker states itLoad cell: ±1.5% of full scale (up to ±0.9 kN)Digital gauge: ±1.5% fsd. Analogue gauge: not publishedNot published
Torque at full load25 Nm maximum at 60 kN68 Nm at 50 kN (from Hydrajaws' M35+ leaflet)18.8 Nm at 65 kN
DisplayFull colour screen showing live and peak load together; metric and imperialDigital or analogue gauge, dual scale kN and lbf; the digital gauge has peak holdRechargeable digital gauge, dual scale kN and lbf, with peak hold
App and recordsStaht Connect, free with no subscription, over Bluetooth: peak load, target load, pass or fail, time, photos and a map pin; reports from a web dashboardHydrajaws Verify PRO, free, with the digital gauge: report with pass or fail, graph, fixing details, location, date, time, notes and photos; reports also on a web dashboardHydrajaws Verify PRO, free: the same reports and web dashboard
Team useFree, with no subscription: several users, with reports filtered by team member and shared with your teamVerify PRO free, "Ideal for single users"; Verify TEAMS, for an administrator to assign tasks to field testers, paid: "Annual subscription fee applies. Up to 3 users £300" (ex VAT; read 8 Nov 2026)As the M2050 PRO
Weight, as the maker states itLoad cell 1.5 kg; bridge 2.8 kg; kit 10.1 kg; packaged 10.8 kgTester only 2.5 kg; case weight 16 kg (leaflet), packaged weight 14 kg (manual)Tester only 3.7 kg; medium and large bridge weights and Dual kit weight: not published
Bridge4 legs; clear between feet 127 mm along the bridge, 59 mm across; optional 375 mm bridge rated 60 kN3 legs; 213 mm between feet edges (leaflet), 216 mm on the manual's drawing3 legs; medium bridge 210 mm span, large bridge 310 mm span
Adaptors in the kitAnchor jaw with threaded washers M6, M8, M10, M12, M16, M20 and slotted washers M6 to M16; clevis with captive pinM12 ringbolt clevis; bolt tester adaptor with M12 locking adaptor; M10 and M12 threaded buttons; 6 slotted buttons; M16, M20, M24 stud adaptors (metric)Bolt test adaptor; 20 mm and 24 mm clevis forks; 5 slotted and 6 threaded (M6 to M20, metric kit) button adaptors
Calibration12-month certificate included; recalibration by Staht or by a local calibration laboratoryGauge certificate valid 12 months; the gauge detaches for recalibration by Hydrajaws or its service agentsGauge certificate valid 12 months
Standards named, in each maker's or seller's wordsDesigned for testing to BS 8539, BS 7883, NASC TG4:25, AEFAC TN05 and ASTM E3121Testing "in line with" BS 8539, BS 7883, BS EN 795 and AEFAC-TN05Testing "in line with" BS 8539, BS 7883:2019, BS EN 795:2012, BS 8610, NASC Guidance Note TG4:19 and AEFAC-TN05

Each maker's published figures, read on 7 and 8 November 2026; Verify TEAMS prices read on 8 November 2026. Each Hydrajaws figure is from the product page linked, or the leaflet or manual it links to (see Sources). The BIGBEN kits Leach's describes all apply up to 25 kN.

How should the figures be read?

  • Accuracy. Staht and Hydrajaws both give ±1.5% of full scale where they publish a figure: Staht for the t25 and t60 load cells, Hydrajaws for its digital gauges. That allows the same possible error in kN at every reading, so it is a bigger share of a low reading. Check each calibration certificate for the measured errors. Leach's gives no figure for the BIGBEN gauge. See gauge accuracy.
  • Weight. Hydrajaws' published "tester only" weights (2.2 to 3.7 kg) are lower than the t25's load cell and bridge together (1.39 kg and 2.72 kg, Staht data sheets TDS 134 and TDS 135). Hydrajaws doesn't say what its figure includes. Leach's doesn't publish a weight for the BIGBEN kits.
  • Bridge. Staht gives the clear distance between the feet; Hydrajaws gives "between feet edges" or a "span". What affects a test is how far the nearest foot is from the anchor: see bridge leg spacing.
  • Legs. The t25 and t60 bridges have four legs; the M2000 PRO, M2050 PRO and M35+ have three. Staht also sells three-leg t25 kits.

What about heavy duty testers?

This page doesn't compare kits above 65 kN. Hydrajaws lists the M2008, a tester and bridge to 145 kN, and hydraulic hollow cylinder kits of 180, 370 and 500 kN. The BIGBEN kits Leach's describes all apply up to 25 kN. Staht's heavy duty kits are 176 kN and 358 kN, with a hand pump, hose and hollow ram; their G1 Pro gauge reads pressure, and the free Staht Connect app shows the load in kN from the ram's piston area. For digital hydraulic gauges, see digital hydraulic pressure gauges compared. See each maker's pages for full specifications. For choosing by job and load, see which pull tester to buy.

More questions

Hydrajaws products are made by Hydrajaws Limited. BIGBEN kits are sold by Leach's, a trading name of Beacon Group International Products Limited, which is also a Staht distributor. Hydrajaws Limited and Beacon Group International Products Limited are separate companies from Staht Limited.

Sources, accessed 7 and 8 November 2026

  1. Staht 25kN Digital Tensile Tester Kit, c/w Accessories & Heavy-Duty Mini Case, Technical Datasheet No 133, Staht
  2. Staht 25kN Digital Tensile Tester Load Cell, Technical Datasheet No 134, Staht
  3. Staht Bridge 25kN, Technical Datasheet No 135, Staht
  4. Staht Bridge 60kN, Technical Datasheet No 103, Staht
  5. Staht Bridge 375-25, Technical Datasheet No 139, Staht
  6. Staht Bridge 575-25, Technical Datasheet No 140, Staht
  7. Staht Bridge 375-60, Technical Datasheet No 141, Staht
  8. Staht 60kN Digital Tensile Tester Kit, c/w Accessories & Heavy-Duty Case, Technical Datasheet No 100, Staht
  9. Staht 60kN Digital Tensile Tester Load Cell, Technical Datasheet No 102, Staht
  10. Staht t25 kit product page, Staht
  11. Staht t60 kit product page, Staht
  12. Staht Connect, Staht
  13. Staht t25 and t60 load cell accuracy: Pull Tester Gauge Accuracy and Calibration Intervals, Staht
  14. Hydrajaws M2000 PRO Tester Kit product page, Hydrajaws
  15. Hydrajaws M2000 PRO Tester Kit product information leaflet 132-177 v1.1, Hydrajaws
  16. Hydrajaws M2000 Tester Range operating instructions 132-113 v1.6, Hydrajaws
  17. Hydrajaws M2050 PRO Tester Kit product page, Hydrajaws
  18. Hydrajaws M2050 PRO Tester Kit product information leaflet 132-183 v1.1, Hydrajaws
  19. Hydrajaws M2050 manual 132-016 v4.1, Hydrajaws
  20. Hydrajaws M35+ Dual Load Capacity Digital Pull Tester product page, Hydrajaws
  21. Hydrajaws M35+ product information leaflet 132-234 v1.2, Hydrajaws
  22. Hydrajaws M35+ user manual 132-220 v1.1, Hydrajaws
  23. Hydrajaws M2008 Heavy Duty Tester Kit product page, Hydrajaws
  24. Hydrajaws M2008 operating instructions 132-010 v3.5, Hydrajaws
  25. Hydrajaws hydraulic hollow cylinder tester kits product page, Hydrajaws
  26. Hydrajaws Verify digital reporting system, Hydrajaws
  27. Hydrajaws calibration and servicing, Hydrajaws
  28. About Staht: where Staht designs and makes its testers, the Product of the Year award and UKAS-traceable calibration, Staht
  29. Staht pull testers range page, Staht

Big Ben sources (Leach's), accessed 8 November 2026

  1. BIGBEN Anchor Test Kit for Scaffolds (AF-7170) product page, Leach's
  2. BIGBEN Anchor Pull Tester Kit for Construction Fixings (AF-7190) product page, Leach's
  3. BIGBEN Construction Pull Tester Kit page, Leach's
  4. Construction Anchors & Testing range, with the BIGBEN replacement gauges and leg extensions, Leach's
  5. Why the BIGBEN Anchor Test Kit should be your Go-To-Tool (article, 14 August 2024), Leach's

See the Staht t25 and t60

Digital pull testers with live and peak load on screen and the Staht Connect app.

Your basket

Loading your basket…