Adapters
Threaded adaptors and washer packs so your t25 or t60 fits the anchor.
Adaptors and washers for every anchor
Your Staht t25 or t60 connects to the anchor through its tool adaptor jaw and a washer, or through a threaded adaptor on the drop rod. Pick the one that fits the fixing.
Washer packs for the tool adaptor jaw
- Threaded washers for metric threaded anchors and studs: the 25 kN pack has M6, M8, M10, M12 and M16; the 60 kN pack adds M20.
- Slotted washers for headed bolts: M6, M8, M10, M12 and M16.
- Imperial pack: threaded washers from 1/4 to 3/4 inch and slotted washers from 1/4 to 5/8 inch.
The jaw is magnetic, which holds the washers in place and helps stop drops at height.
Threaded adaptors for larger anchors
These fit straight onto the M16 drop rod of the t25 and t60 and convert it to a larger thread: M22, M24, M27 and M30, and 7/8, 1 and 1 1/8 inch. One adaptor is supplied. Ask us about special sizes.
For eyebolts, use the clevis; for Reid Lifting davits, the davit testing adaptor kit. More spares are in spares and accessories.
Questions and answers
Use a threaded washer for threaded anchors and studs, and a slotted washer for headed bolts. Both fit the tool adaptor jaw.
Fit a threaded adaptor to the M16 drop rod: M22, M24, M27 or M30, or 7/8, 1 or 1 1/8 inch. The test load is still limited by the tester: 25 kN for the t25 and 60 kN for the t60. For higher loads, use a heavy duty kit.
Yes. The imperial washer pack has threaded washers from 1/4 to 3/4 inch and slotted washers from 1/4 to 5/8 inch, and there are 7/8, 1 and 1 1/8 inch threaded adaptors.
Special sizes of threaded adaptor are available on request. Contact us.











