Written by Staht from its product data sheets and brochures. Updated 4 November 2026.
Testing must be done by competent people, following the relevant standard and the manufacturer's instructions. Our testers measure the load applied; they don't certify an anchor, fixing or installation.
At a glance
| Range | 0 to 25 kN (5,620 lbf) |
| Load cell | Staht t25, not included |
| Kit | Test plates, 40 kN karabiner, 3.2 t shackle and pin, 4 t M16 eyebolt, padded bag |
| Standards named in the brochure | BS 7883:2019 Annex D and E, OSHA regulations |
What is in-line testing used for?
Typical uses are testing between fall protection anchor posts, overhead lifting points and rail systems.
Which load cell does it use?
The Staht t25 load cell. Use the one from your t25 kit, or buy a t25 load cell.
How is the result recorded?
The t25 pairs over Bluetooth with the free Staht Connect app, which records the peak load with photos and a map pin.
Sources
- Staht In-Line Test Kit brochure and data sheet TDS 138, Documentation
Measure in-line force
See the in-line test kits.