Written by Staht from its product data sheets and brochures. Updated 4 November 2026.
Testing must be done by competent people, following the relevant standard and the manufacturer's instructions. Our testers measure the load applied; they don't certify an anchor, fixing or installation.
At a glance
| Adaptor kit | 600-048: M16 sealed thrust nut, M16 coarse drop rod and clevis |
| Bases | Flush mount and top mount |
| Tester | Staht t25 or t60 |
| Also needed | 24 mm reversible ring spanner (601-037) |
What's in the davit testing adaptor kit?
An M16 sealed thrust nut, an M16 coarse drop rod and a clevis, for use with the Staht digital tester when testing davits.
Which davits does it suit?
Reid Lifting davit installations, with flush mount and top mount davit bases.
What else do I need?
A Staht t25 or t60 and a 24 mm reversible ring spanner.
How is the test recorded?
In the free Staht Connect app, through the tester's load cell.
Sources
- Staht Davit Testing Adaptor Kit data sheet TDS 124, Documentation
- Staht, Davit testing adaptor kit
Test your davit bases
See the davit testing adaptor kit.