Free toolbox talk

Scaffold tie testing toolbox talk

In short

A free 16-slide toolbox talk on testing scaffold tie anchors to NASC TG4:25, by Rob Hirst, Staht's Managing Director. It takes 20 to 25 minutes and comes as an editable PowerPoint with speaker notes, a PDF, and a one-page sign-off sheet to record who attended.

This guide explains how site tests are planned and carried out under BS 8539:2012+A1:2021 and NASC TG4:25. It does not replace those documents, the anchor manufacturer's data, or the instructions of the scaffold designer, specifier or engineer responsible for the job, who decides the test plan, the loads and the factors. A test records what happened on the day; it does not approve a fixing for use.

Download the talk

Email it to me

Tick the files you want and we’ll email them to you. The links work for 30 days.

Files to send

We use these details to send you the files and to follow up about them. Read our privacy policy

Key figures

Length20 to 25 minutes
Slides16, with speaker notes
FormatsEditable PowerPoint, PDF, and a one-page sign-off sheet
FollowsNASC TG4:25 (March 2025)

Who is it for?

Scaffolders who fit ties, their supervisors, and anyone who tests tie anchors. It works as a site toolbox talk or as a refresher before a test day, and the preliminary-test slides are useful to designers and contracts managers too.

It's meant to be given by someone who knows tie testing, such as a supervisor, trainer or competent tester, who can answer questions from the group.

What does the talk cover, slide by slide?

  1. Title and scope: what the talk covers and who it's for, under NASC TG4:25 (March 2025).
  2. What's changed since TG4:19: eight differences: standard duty B ties at 9.1 kN, a 1 mm pass mark for preliminary tests, drop-ins in hard natural stone, re-used capped nylon plugs, batch testing, the line of fire, anchor checks at scaffold inspections, and no impact wrenches.
  3. Why we test ties: ties hold a scaffold against the wind, not its weight, and nobody can judge a buried anchor by eye.
  4. The process, start to finish: from the tie duty to proof testing a sample on every job, with preliminary tests where the wall's capacity is in doubt. See scaffold tie anchors.
  5. Three loads: working, recommended and allowable load, and the tie duties of 3.5, 6.1, 9.1 and 12.2 kN. See scaffold tie test load.
  6. Two tests, two questions: preliminary tests ask whether the wall can take the load; proof tests ask whether the anchors were fitted properly.
  7. Preliminary testing: 5 anchors per base material at 2 × the tie duty (3 × for nylon plugs unless the maker says otherwise), the 1 mm pass mark, and the options after a failure. See preliminary tests.
  8. Proof test loads: 1.25 × the tie duty: 4.4, 7.6, 11.4 and 15.3 kN in TG4:25's table.
  9. How many to proof test: at least 1 in 20 at random, and at least 3 in each discrete area, the doubled rates, and batch testing. See proof testing.
  10. After a proof test failure: 1 in 10, then 1 in 5, then every anchor, and finding the cause.
  11. Testing safely: the line of fire, a calibrated gauge, pulling on the anchor itself, and keeping the rig's feet off the brick under test.
  12. Right anchor, right material: drop-ins, self-tapping screws, nylon plugs and resin anchors, and the walls each suits. See scaffold anchor types.
  13. Installing anchors: drilling, cleaning, setting and torque, embedment limits, and six turns into a socket.
  14. Where to fix in brickwork: edge distances and spacing when the maker gives none, mortar joints, header bricks and rendered walls.
  15. Inspection, re-use and records: what to look for at scaffold inspections, when an anchor may be re-used, and what each test record holds. See checking anchors during a job and the free scaffold tie test record.
  16. Five things to take away: a recap to ask the group back.

How do I give the talk?

Read the speaker notes first: they carry the detail, the TG4:25 section behind each point, and where to stop and ask the group a question.

Then make it yours. TG4:25 asks every firm to set out who is responsible for testing anchors and who to call when one won't take its load, so add those names. Add your method statement's hold time for proof tests too, as TG4:25 doesn't set one.

On the day, allow 20 to 25 minutes, have everyone sign the sheet, and keep it with your training records.

How was it checked?

Every figure and rule in the talk was checked against NASC TG4:25, and each point on what changed was checked against the previous edition, TG4:19 (March 2019). The wording is our own: the talk sums up TG4:25 and doesn't reproduce it, so keep a copy of TG4:25 to hand. An independent check was run before it was published.

Who wrote it?

Rob Hirst, co-founder and Managing Director of Staht, wrote the talk. He spent 13 years as an engineer and product manager at Uniline Safety Systems, Capital Safety and 3M before co-founding Staht. More about Rob.

More questions

Sources

  1. NASC TG4:25 Anchorage Systems for Scaffolding, NASC
  2. NASC TG4:19 Anchorage Systems for Scaffolding, Rev E (archived copy), NASC
  3. NASC launches new TG4 update to support anchor tie safety, NASC

Record the tests

A free fillable record for scaffold tie tests, with cut-out tags.

Your basket

Loading your basket…