Pressure gauges up to 1000 bar
Hydraulic pressure gauges, Staht's and other makes.
A UKAS traceable calibration certificate, printed and digital
Staht calibrates pressure gauges up to 1000 bar: its own G1 Pro digital hydraulic gauge and other makes. We calibrate against reference equipment traceable to UK national standards, and each calibration comes with a UKAS traceable certificate. For a price, contact us with the gauge's make, model and range, and tell us when you need it back.
Hydraulic pressure gauges, Staht's and other makes.
A UKAS traceable calibration certificate, printed and digital
Our G1 Pro digital Bluetooth hydraulic gauge reads up to 1000 bar and is accurate to 0.25% of full scale. We calibrate it and issue a UKAS traceable calibration certificate.
Calibration and service of a Staht t25 or t60 is £135 ex VAT (£162 inc VAT), with a 12-month calibration certificate. Other makes too: see pull tester calibration.
| What | Price |
|---|---|
| Pressure gauges up to 1000 bar, including the Staht G1 Pro | Ask us, with the make, model and range |
| Staht t25 or t60 pull tester: calibration and service, with a 12-month calibration certificate | £135 ex VAT (£162 inc VAT), booked and paid for online |
| Repairs and parts found to be needed | Quoted before we do any work beyond what you booked |
Contact us with the gauge's make, model and range, and tell us when you need it back. We'll tell you whether we can calibrate it, and the price.
Send it to us clean, packed securely and with any accessories. Unless we agree otherwise, it travels at your risk and cost.
If we find a fault or a part that needs replacing, we tell you the cost before doing more than you booked.
Each calibration comes with a UKAS traceable certificate, printed and digital, recording how the gauge performed on the day.
At least once a year, or more often if your standard or client asks. Calibrate again after a drop, an overload or any reading you doubt. Site tests to BS 8539 and NASC TG4:25 need the test gauge calibrated within the last 12 months.
Keep the certificate with the gauge, and put the calibration date and who calibrated it in your test reports. Our guide to pull tester gauge accuracy explains the accuracy site tests need, and how often to calibrate a pressure gauge what decides the interval and what a certificate shows.
On a cylinder, the load is the gauge's pressure times the cylinder's effective area, so any error in the reading carries into the load. A gauge accurate to a percentage of full scale has the same possible error, in bar, at every reading: the G1 Pro, at 0.25% of 1000 bar, is within ±2.5 bar anywhere on its scale. Multiply that error by the cylinder's effective area, and by the number of cylinders, to get it in kN, so it matters most at low pressures on large cylinders. Work it through with our hydraulic pressure to force calculator, and see pressure gauge accuracy explained.
Ask us for a price: contact us with the gauge's make, model and range. For pull testers, calibration and service of a Staht t25 or t60 is £135 ex VAT (£162 inc VAT), booked online.
Yes. We calibrate pressure gauges up to 1000 bar, Staht's G1 Pro and other makes. If we can't safely or properly work on a gauge, we'll tell you why.
Up to 1000 bar.
Yes. We calibrate against reference equipment whose own calibration traces through an unbroken chain to UK national measurement standards. Each calibration comes with a UKAS traceable certificate recording how the instrument performed on the day. Check what your standard or client asks for before you book.
Ask us: tell us when you need it back, and we'll tell you what we can do, including whether we can calibrate it while you wait.
Yes. Contact us to book calibration of your G1 Pro digital hydraulic gauge.
Tell us the gauge's make, model and range, and when you need it back.