Our guides now explain the main standards behind site testing, in plain English.

On 7 November 2026 we published 18 guides. Twelve cover testing anchors and fixings on site under BS 8539: when a site test is needed and when it isn't, proof testing, preliminary tests and a test load calculator, bridge leg spacing, connecting the tester, gauge accuracy, first movement and failure, testing in masonry, test reports, shear tests and a kit checklist for test day.

Six cover scaffold tie anchors under NASC TG4:25, from the tie duty and test loads to proof testing ties and checking anchors during a long job. Free templates for an anchor test report, a scaffold tie test record and a proof load test certificate followed the same day.

On 15 November we added Staht in-line kit or a dynamometer?. Both measure the pull in a line between two points. The in-line kit holds the t25 load cell you already use for pull tests, measures up to 25 kN and records each test in the free Staht Connect app. It costs £425 ex VAT (£510 inc VAT), without the load cell. The guide sets it beside Tractel, Crosby Straightpoint and Dillon dynamometers on range, accuracy, read-out and calibration, from each maker's published figures, and says when each is the better tool.

Each guide answers its question first and names its sources and their editions. The words are our own. The guides explain the standards; they don't replace them, the anchor maker's data or the instructions of the engineer responsible for the job.