Staht T25 Digital Pull Tester, 3 leg, with case
Three-leg Staht t25 digital pull tester for anchors, safety eyebolts and scaffold ties up to 25 kN, in a heavy duty compact mini case.
Calibrated, with its certificate. It pairs over Bluetooth with the free Staht Connect app, which records each test with peak load, pass or fail, photos and a map pin, ready for your report.
In the kit: t25 digital load cell and three-leg bridge, anchor jaw, clevis, threaded and slotted washers (M6 to M16), 6 mm hex key, 17 mm socket and 3/8 inch socket wrench, 24 mm ratchet spanner, anti-rotation arm, tool and wrist lanyards and a USB-C cable, in the heavy duty mini case.
Hire terms: £180 a week (inc VAT) for a minimum of one week, then £60 a day (inc VAT) for each extra day. £500 deposit, refunded once the kit is back and checked, less any charges the hire terms allow. Delivery is worked out from your address at checkout, or collect for free.
Before you test: read our guide to when anchors need site testing, watch how to use the Staht t25, or see all our guides. More questions are answered in the FAQs.
Read the hire termsIn short
A three-leg Staht t25 digital pull tester kit, calibrated and supplied with its certificate, for testing anchors, safety eyebolts and scaffold ties up to 25 kN. It's £150 a week ex VAT (£180 inc VAT) for a minimum of one week, then £50 a day ex VAT (£60 inc VAT) for each extra day you book, with a £500 refundable deposit. It pairs over Bluetooth with the free Staht Connect app, which records each test.
1. Choose what to hire
- Day rate
- £50.00
- Week rate
- £150.00
- Minimum hire
- 7 days
- Deposit, refundable
- £500.00
Three-leg Staht t25 digital pull tester for anchors, safety eyebolts and scaffold ties up to 25 kN, in a heavy duty compact mini case.
Read moreRead less
Calibrated, with its certificate. It pairs over Bluetooth with the free Staht Connect app, which records each test with peak load, pass or fail, photos and a map pin, ready for your report.
In the kit: t25 digital load cell and three-leg bridge, anchor jaw, clevis, threaded and slotted washers (M6 to M16), 6 mm hex key, 17 mm socket and 3/8 inch socket wrench, 24 mm ratchet spanner, anti-rotation arm, tool and wrist lanyards and a USB-C cable, in the heavy duty mini case.
Hire terms: £180 a week (inc VAT) for a minimum of one week, then £60 a day (inc VAT) for each extra day. £500 deposit, refunded once the kit is back and checked, less any charges the hire terms allow. Delivery is worked out from your address at checkout, or collect for free.
Before you test: read our guide to when anchors need site testing, watch how to use the Staht t25, or see all our guides. More questions are answered in the FAQs.
