Lühidalt
Download Staht's free anchor site test report as a fillable PDF. It follows what BS 8539 recommends a report records: the job, the anchor and the test asked for, the base material, the installation, each anchor's position and result, the equipment and its calibration, and a sign-off saying the report records facts only.
See juhend selgitab, kuidas objektikatseid kavandatakse ja tehakse vastavalt standardile BS 8539:2012+A1:2021. See ei asenda standardit, ankrutootja andmeid ega töö eest vastutava projekteerija või inseneri juhiseid – tema otsustab katsekava, koormused ja tegurid. Katse dokumenteerib, mis tol päeval juhtus; see ei kinnita kinnitusdetaili kasutamiseks sobivaks.
Download the template
Key figures
| Format | Fillable PDF, A4, two pages: type on screen or print |
|---|---|
| Results | 13 rows, one per anchor |
| Cost | Free to use, copy and adapt |
What's in the template?
| Part | Fields |
|---|---|
| 1. The job | Report number, date of tests, who asked for them, client and contact, site address and contact |
| 2. The anchor and the test | Anchor make, type, size and finish; the fixture; characteristic action N_Ek; design or recommended resistance; test type; procedure; test load; how many to test |
| 3. The base material | What it is, solid or hollow, strength if known |
| 4. Installation | Installer; hole diameter; drill bit cutting diameter to 0.1 mm; hole depth; effective embedment; cleaning; torque specified and applied; temperature and curing times for bonded anchors |
| 5. Results | For each anchor: position, edge distance and spacing, member thickness, distance to the nearest support, highest load, first movement load if asked for, condition and failure mode, pass or fail; movement at each load step, if asked for, attached |
| 6. Equipment | Tester make, type, capacity and serial number; last calibration and who did it; movement gauge and torque wrench |
| 7 to 9. Notes, sign-off, attachments | Departures from the procedure; tester's name, job title and qualifications; witnesses; method statement, calibration certificate and drawing attached; the statement |
Is it a certificate or a report?
People search for an "anchor pull test certificate", and the document is the same thing: a record of the tests. We call it a report because it doesn't certify that a fixing is fit for use. It states what each anchor did on the day; the specifier or responsible engineer decides what that means.
How to fill it in
- Fill in parts 1 to 3 before the visit, from the test request.
- Fill in part 4 only if you installed the anchors or watched them go in.
- Give each anchor's position on a drawing, or describe it well enough for someone on site to find it.
- Name any failure mode using the groups in first movement and failure modes.
- Sign, and attach the method statement and the tester's calibration certificate.
- Give the report to the person who asked for the tests.
Do I need it if I use Staht Connect?
Not for the results: the Staht Connect app records each test's peak load, target load, pass or fail and time, with photos and a map pin, and the dashboard makes a report in one click. Check that whatever produces your report covers every item in the template: use the app's custom form fields, or this template, for items such as the drill bit diameter.
Related pages
More questions
Yes. It's free to use, copy and adapt. Add anything your job needs.
Yes. Part 2 records the test type and procedure, and the results table has a column for the load at first movement, which BS 8539 asks to be recorded in site tests.
It is one of the items BS 8539 lists for a site test report, alongside the hole diameter and depth.
Allikad
Record tests as you go
The t25 and t60 send every result to the Staht Connect app.